Author : Cheow Yu Yuan

Do you want to save some money by installing a car audio system yourself? To install a car audio system, it is not that hard after all, and you definitely can do it Doing a car audio installation is a very rewarding experience for you too, as you will get to learn a lot from it Once you get it installed, you will feel a sense of satisfaction from it Now go and get your desired system

What is next after you have bought the system? When you are installing it, you must be very careful as you will not want to damage your expensive system Most of the audio systems are no-brainers to install They have shaped sockets and slots which would only fit where it is supposed to be installed It is advisable for you to follow the instruction manual and proceed methodically

Before the installation, you have to determine what kind of rig you are going to put into your car first If you are a beginner in car audio installation, it is advisable for you to start from a simple system Leave the more complicated stuffs like LCD installation and motorized parts to the professionals

One of the easiest things to install is the head units Most head units follow a standard size For most of the cars, once the factory radio is removed, the aftermarket radio will fit in the hole However, some cars may have hole which is too big, and in this case, you will need a kit to install it To get kits required for installation, you can visit any car audio stores in your town

Basically, there are 2 types of mounting in a car audio installation The first is the ISO mounting It is when the radio can be screwed to existing factory radio brackets Most Japanese cars are ISO mounted The second type of mounting is the ring mounting It is when an aftermarket radio comes with a metal ring that gets mounted to the factory radio hole In many cars, dash and trim rings have to be filed in order to enlarge the radio hole After you have successfully installed the ring, the radio slides in and is held by snaps However, if you want to remove it in the future, special tools are required

Now, let us talk about speakers Speaker installation is very critical for your car audio system If the speakers are not installed properly, the sound will not be up to par In simple system installation, you are most likely to use speakers which fit correctly into a factory location Just make sure that there are no gaps or holes One tip to get better sound is to build a wood or fibreglass baffle to reduce holes But be careful when using power tools around speakers and the warranties usually do not cover holes in speakers Do check with your car audio seller before any purchase If your speaker cannot fit into the location, metal need to be cut It is highly advisable for you to leave this to the professionals to save you some troubles

Lastly, after you have successfully installed your car stereo, you need to make sure that it can put up with vibrations and other noise sources There are excellent sound proofing products in the market that can help to decrease the noise tremendously

To find quality car accessories, car audio and servicing, visit the website below now: Click Here: More car accessories at... www.Silent.com.sg Feel free to publish this article on your website, or send it to your friends, as long as you keep the resource box and the content of the article intact.

Syndication Source: Article Mind

Tagged with:

Filed under: The Trucking Life

Like this post? Subscribe to my RSS feed and get loads more!